Axis AXIS USB Manuale delle Istruzioni Scaricare il pdf (Pagina 68)

bit 2 – Z capture trigger. “1” sets and “0” has no effect.

bit 3 – A capture trigger. “1” sets and “0” has no effect.

bit 31 – tool setting capture trigger. “1” sets and “0” has no effect.

hw_type – hardware type (see

HyCNC_GetHardwareInfo). 1 – original type; 2 – B/C

type.

The switch input is evaluated every millisecond. The movement should be no

more than 1 pulse per millisecond to achieve the best result when the trigger for

that moving axis is set.

This function is useful for homing or tool setting. The trigger is set during the

homing or tool setting stage, when the switch input changed, the coordinate is

captured. Then the coordinates are read back without any trigger setting. The

captured coordinate can be subtracted from the current coordinate to achieve

“zero” effect.

1 2 ... 63 64 65 66 67 68

Nessun commento

Axis AXIS USB Manuale delle Istruzioni Pagina 68