Axis RightFax 8.5 Manuale Utente Scaricare il pdf (Pagina 13)

RightFax 8.5

EN/LZT 108 5826/6 R2B Ericsson



November 2002 9

Specifying the RightFax Name and LAN Protocol

On the System tab in the OneBox Configuration utility, specify the name of the

RightFax server and the network protocol in the Name and Protocol boxes in the FAX

Server group box as shown in Figure 1.

If the fax server is running on the same platform as the telephony server and you are

using Named Pipes as your protocol, the Name box can contain a dot ( . )—the UNC

convention for local server name—or the computer name given to the telephony server

in Windows. If you are using TCP/IP, you will need to enter the IP address in the

server name field as shown in the sample screen below.

If the fax server is running on one or more separate platforms and the TCP/IP

protocol is used, you must type the IP address of the main fax server in the Name box.

If the fax server also has a BoardServer installed on a third platform, type the IP

address of that platform in the Board Name box. We recommend that you use

dedicated IP addresses to streamline communications between the telephony and fax

servers. If you are using Named Pipes (NetBEUI), type the computer names given to

the fax server platforms in Windows. The protocol you select here must match the

protocol you select in the WorkServer module configuration when you enable

telephony server routing.

For additional help completing the Name and Protocol boxes, refer to the online help.

Figure 1: System Configuration Tab

Complete these

two fields …

… and this one

if necessary

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Nessun commento

Axis RightFax 8.5 Manuale Utente Pagina 13