Axis 2400+ Manuale Utente Scaricare il pdf (Pagina 16)

• Check that it worked by connecting to

http://www.angelﬁ re.com/art/buffalo

The Web page you made should now be seen. The

image will not be shown, because it does not exist yet

• Install the network camera

• Install the camera and assign an IP address e.g.

200.132.12.15

• Access the network settings in the camera and enter

this info

• Subnet mask: 255.255.255.0

(Normally 255.255.255.0)

• Default router: 200.132.12.1 (Same as Default gate-

way in your PC)

• Host name: Axis Camera (Can be anything)

• Domain name: axis.se (Can be anything)

• Primary DNS: 200.132.12.3 (Same as in your PC)

• Secondary DNS: 200.132.12.7 (Same as in your PC)

• HTTP port: 80 (Normally 80)

Program an application into the camera

• Enter this info using the wizard

• Continuously upload pictures

• Primary time enabled /Always /Every 1 hour(s)

• Secondary time disabled (no check in the box)

• Upload via FTP

• Host Name: ftp.angelﬁ re.com

• User Name: buffalocamera

• Password: hanna

• Upload path: (None,leave box empty)

• Base File Name: elmwood

• Overwrite (check)

When this is done, the camera will start uploading

images to the Web page.

The image will be stored with this address:

http://www.angelﬁ re.com/art/buffalo/elmwood.jpg

If it did not work check that you can access the host,

Angelﬁ re.com

• Start a DOS window on a PC

• Type: ftp ftp.angelﬁ re.com

• Enter user name: buffalocamera

• Enter password: hanna

• You should now receive the message

User ‘art/buffalo ’logged on

• Type: dir

• You should now receive a list of the ﬁ les, e.g.

index.html and Elmwood,jpg

• Type: quit

• This will end your session. You can also check the

log ﬁ le in the network camera

• Enter the home page of the camera. Click on the

Administration tools

• Enter the log list, found under the support link

Weather condition.

A PPLICATIONS

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 51 52

Commenti su questo manuale

Nessun commento

Axis 2400+ Manuale Utente Pagina 16

Commenti su questo manuale

Prodotti e manuali riguardandi Networking Axis 2400+